Samsung Galaxy Beam I8530 Power Key Ways Solution

Samsung Galaxy Beam I8530 Power Key Ways Solution,
Samsung GT-I8530 Power On Off Key Jumper, Track, Ways
In this post I will explain solution for Samsung Galaxy Beam I8530 power problem. So if your phone is jammed and not powering up at all this post can be really helpful to you.

Refer to the solution below to determine its connection line paths and connected components. In some cases like power switch terminal solder pads is lifted or the capacitor and resistor already been missing, you may need to use a microscope and sharp blade knife, then dig out the PCB layer where the capacitor or the resistor conductive connection and then manage to establish a solder connection on that spots.

Solution By d-artigo
The highlighted components above is where the power switch is being connected, if these components were damaged it will result to power switch failure. You may need to check and then replace these components as well.

Just manage to apply a jumper wire on a spots where the said Samsung Galaxy Beam I8530 power key connection.

Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back any time on this page to stay up to date.

If you have further questions please don’t hesitate to leave a comment.

Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
Samsung GT-I8530 Power Button,Power Key,Power Switch,On-Off Button, On-Off Switch, Power Problem