Nokia 107 Lcd Display Light Ways Problem Jumper Solution — long time no see you with all my friends, hopefully in a fine state. ok on this occasion we want to share information about how to repair the damage to the display screen on the Nokia 107. This guide also support for blank white screen, the screen does not appear, the problem on the screen, and tricks on how to jumper socket path screen. see the image below to complete damage to the screen of your Nokia 107.
Or
Equipment Required
Fine wires
Tin.
Solder.
Tester.
Scissors
Fine wires
Tin.
Solder.
Tester.
Scissors
How to Make a Jumper in the Socket Display
Prepare a cable smooth and adjust the length that we will connect its tracks
Heat Tin with solder for attaching fine wires so that it will closely united.
Use a voltage tester to measure the jumper cables.
Prepare a cable smooth and adjust the length that we will connect its tracks
Heat Tin with solder for attaching fine wires so that it will closely united.
Use a voltage tester to measure the jumper cables.
Tips & Warning
Make sure the jumper cables are connected properly so that it can deliver a good flow.
Make sure that the jumper cables are not connected directly with the other jumper cable.
The only hint of Mobilerdx on how to make a lane jumper socket on the Nokia 107. good luck
Make sure the jumper cables are connected properly so that it can deliver a good flow.
Make sure that the jumper cables are not connected directly with the other jumper cable.
The only hint of Mobilerdx on how to make a lane jumper socket on the Nokia 107. good luck
Nokia 107 Display light Ways, Lcd Light Jumpers, Light Not Working Problem, Full lcd Track Lines, Lcd Light Solution
No comments:
Post a Comment